29
3. All inspection and maintenance results must
be documented on the checklist 1.
4. Inspection and maintenance carried out by
trained professionals must be documented on
yearly row in checklist 1.
5. All parts replaced by trained professionals
must be documented on checklist 2.
6. When performing regular inspection, please
take into the consideration the national
laws and regulations for worker safety.
Regular inspection and maintenance:
Every 3 months or every 10,000 weighings:
(Please use checklist 1 for record keeping)
1. Use Checklist 1 and the diagram provided
to check parts for wear, deformation and
fractures.
To Next Page
Loading...