UWELL CALIBURN A2S Pod System

Need help?

Do you have a question about the UWELL CALIBURN A2S Pod System and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Packaging Includes

The UWELL CALIBURN A2S Pod System is a draw-activated vaping device designed for ease of use and a satisfying flavor experience. It features a sleek, portable design with a smooth surface decorated with cut lines, making it distinctive. The device is compatible with CALIBURN A2 Refillable Pods.

Function Description

The CALIBURN A2S operates by drawing to vape, making it very straightforward to use. When power is on, the LED lights flash like a wave during vaping and fade out from bottom to top when vaping stops. An animated light matrix flashes during vaping, adding a unique visual element. The device is equipped with several safety mechanisms, including short-circuit protection, low voltage protection, and overtime protection.

Important Technical Specifications

Materials: Aluminium Alloy, PCTG
Dimensions: 110.1 mm × 21.3 mm × 11.7 mm
Net Weight: 30 g
E-liquid Capacity: 2 ml
Output Power: Maximum 15 W
Pod Specification: FeCrAl UN2 Meshed-H 1.2Ω CALIBURN A2 Side Refilling Pod
Battery Capacity: 520 mAh
Charging: Type-C port, 5V/1A charging current.

Usage Features

Quick Guide:
- Remove the pod, open the filler plug, fill the e-liquid through the filling port, and then replace the filler plug.
- Allow the pod to sit for 10 minutes after filling to ensure the coil is fully saturated and prevent burning.
- Insert the pod into the device and draw to vape.
Refillable Pods: The device uses refillable pods, which are designed to be cost-effective. The filling process involves removing the pod, opening a side filler plug, and inserting the e-liquid bottle nozzle into the filling port. It's crucial not to leave the filling port open for too long to prevent leakage and to refill when the e-liquid reaches the MIN level.
Pro-FOCS Flavor Adjustment Technology: UWELL's upgraded Pro-FOCS technology is integrated to restore and enhance the flavor of your e-liquid excellently.
Battery Level Indication: The LED indicator provides clear feedback on the battery status:
- Green light: Battery level over 60%.
- Blue light: Battery level between 30% and 60%.
- Red light: Battery level under 30%.
- A red light flashing 10 times indicates a critically low battery, and the device will stop output.
Safety Protections:
- Short-circuit protection: The LED indicator flashes 3 times in red, and the device stops output.
- Low voltage protection: The LED indicator flashes 10 times in red, and the device stops output.
- Overtime protection: The light flashes 5 times in green to indicate vaping for over 8 seconds, and the device stops output.
- Open circuit prompt: If the pod is disconnected, the blue light flashes 3 times.
Charging Indication: When connecting the Type-C cable, LED lights illuminate in sequence. A red light indicates a low battery, a blue light indicates a medium battery, and a green light indicates an almost full battery. The green light remains on once charging is complete.

Maintenance Features

Cleaning: Use a dry and soft cloth to clean the device. Keep it away from water or any liquids.
Storage:
- Avoid high temperatures, low temperatures, and humidity during use or storage to prevent damage to the equipment.
- When traveling by plane, remove the pod cartridge and store it separately to avoid leakage due to pressure changes.
- Do not put the device in your pocket with other hard objects to avoid damage.
Regular Charging: Charge the device at least once a month to maintain battery health.
Disassembly: Do not disassemble the device.
Pod Replacement: When replacing a pod, take out the used pod and install a new one. Remember to let the new pod sit for 10 minutes after the first e-liquid filling to prevent coil burning.
Charging Practices: Always charge with a certified high-quality adapter from a reputable company and a Type-C cable with a charging current of 5V/1A. Be aware that the device and adapter may warm up during charging, so keep them away from flammable and explosive goods.