UWELL Whirl T1 - User Manual

Need help?

Do you have a question about the UWELL Whirl T1 and is the answer not in the manual?

Summary

Initial Use Instructions

Pod Filling Procedure

Detailed steps for filling the pod cartridge with e-liquid.

E-Liquid Filling Precautions

Important notes for safe e-liquid filling and preventing dry hits.

Vaping Operation Guide

How to operate the device by drawing and understanding LED indicators.

Pod Cartridge Management

Pod Replacement Guide

Instructions for removing and inserting pod cartridges.

Pod Replacement Precautions

Guidance on soaking the coil after refilling a new pod.

Tri-Power Mode Selection

How to adjust power output by aligning the pod for different flavors.

Device Protections and Charging

Power Mode Limitations

Notes on device performance with insufficient power for various modes.

Battery Level Indicators

Explanation of LED colors indicating battery capacity.

Protection Features

Details on short circuit, low voltage, timeout, and open circuit protections.

Charging Status

How LED indicators signal charging progress and completion.

General Device Precautions

Charging and Maintenance

Advice on charging, cleaning, and storing the device safely.

Safety and Usage Guidelines

Important safety instructions regarding age, health, children, and pets.

The UWELL WHIRL T1 Pod Mod is a compact and user-friendly vaping device designed for ease of use and a customizable experience. It features a proprietary child safety lock design for enhanced safety and Uwell's Pro-FOCS technology to ensure authentic e-juice flavor. The device is draw-activated, eliminating the need for buttons to fire, and offers multiple circuit protections for stable, safe, and reliable output. Its triangular shape provides a unique and comfortable grip.

Technical Specifications:

Material: PCTG, Aluminum Alloy
Dimensions: 104.3 mm × 25.7 mm × 25.5 mm
Net Weight: 53 g
E-Liquid Capacity: 3 ml
Output Wattage: 14W / 15W / 16W (Three output modes)
Battery Capacity: 1300 mAh
Pod Cartridge Specifications: FeCrAI UN2 Meshed-H 0.75Ω WHIRL T1 Refillable Pod (CRC Version)

Package Contents:

1 × WHIRL T1 Pod Mod (CRC Version)
1 × UN2 Meshed-H 0.75Ω WHIRL T1 Refillable Pod (CRC Version) (Built-in)
1 × User's manual

Usage Features:

Three Output Modes: The device offers three output modes (14W, 15W, 16W) which can be easily switched by aligning the pod cartridge with specific marks on the device.
- Minimum Power Mode (14W): Align the liquid inlet with the logo plate and insert the pod. One green arrow will flash 3 times.
- Medium Power Mode (15W): Align the "II" Mark and insert the pod. Two green arrows will flash 3 times.
- Maximum Power Mode (16W): Align the "III" Mark and insert the pod. Three green arrows will flash 3 times.
Draw Activation: The WHIRL T1 is activated simply by drawing on the drip tip, providing a button-free vaping experience and preventing accidental firing.
Adjustable Airflow: The device features an adjustable air valve, allowing users to customize the airflow to their personal preferences.
LED Indicator Light: An LED indicator light provides visual feedback on device status, including battery level and protection prompts.
Child Safety Lock Design: The refillable pod cartridge incorporates a proprietary child safety lock design, making it a more secure device.
Pro-FOCS Technology: Uwell's Pro-FOCS technology is integrated to ensure an authentic and consistent flavor from the e-juice.

Instructions for Use:

Filling the Pod:
- Pull out the pod cartridge from the body.
- Push the e-juice bottle nozzle into the e-juice inlet to start filling.
- Install the pod cartridge back into the body.
- Attention: Ensure the e-juice bottle nozzle reaches inside the container when filling. To avoid dry-burning, wait 10 minutes after the first e-juice top-up to allow the coil to soak. Refill immediately when the e-juice level reaches the refill mark.
Vaping: The device starts working upon drawing. The LED indicators will be on while the device is working. The maximum working time per draw is 8 seconds as a protection measure. If continuous drawing exceeds 8 seconds, the device will stop working, and the LED indicators will flash green 5 times.
Pod Cartridge Replacement: Take out the old pod cartridge from the body and insert a new one. Attention: Allow the coil to soak for 10 minutes after filling before use.

Maintenance Features & Protections:

Battery Indication Function: The LED indicator signals the remaining battery capacity:
- Green: Over 60%
- Blue: 30%-60%
- Red: Below 30%
- Red (10 flashes): Upon battery depletion.
Short Circuit Protection: In case of a short circuit, the indicators will flash red 3 times, and the device will stop working.
Low Voltage Protection: If the battery is depleted, the indicators will flash red 10 times, and the device will stop working.
Timeout Protection: As mentioned above, continuous drawing exceeding 8 seconds will cause the device to cease working, and the LED indicators will flash green 5 times.
Open Circuit Prompt: If the pod cartridge is not properly connected, the LED indicators will flash blue 3 times to signal an open circuit.
Charging: While charging, the indicators will flash to signal the power level (green for over 60%, blue for 30%-60%, red for below 30%). The indicators will stay on once charging is complete.
- Recommendation: Charge with a certified high-quality adaptor (5V/2A) and a Type-C cable.
- Frequency: Charge the device at least once a month.

General Attention & Safety Instructions:

Charging: Use a certified high-quality 5V/2A Type-C adaptor. Keep the device and adaptor away from flammable and explosive goods during charging, as they may warm up.
Cleaning: Use a dry and soft cloth to clean the device. Keep it away from water or any liquids.
Travel: Remove the pod cartridge and store it separately when on a plane to prevent leakage due to pressure changes.
Storage: Do not put the device in your pocket with other hard objects to avoid damage. Avoid high temperature, low temperature, and humidity during use or storage to prevent damage.
Disassembly: Do not disassemble the device.
Product Representation: Product parameters or pictures in the manual are for illustration purposes only; refer to the actual product.
Age Restriction: This product is only for individuals who have reached the legal age of smoking. It is strictly forbidden for young children, pregnant or breastfeeding women, and patients with heart disease, high blood pressure, diabetes, depression, and asthma.
Child Safety: Keep the product out of reach of children and pets to avoid injury.
Flammable Materials: Keep the product away from inflammable and explosive materials to avoid injury.
Company Responsibility: UWELL does not assume responsibility for equipment damage or personal injury caused by user misuse.

Warranty Details:

Warranty Period: 180 days from the date of purchase.
Coverage: Device and atomizer only (excludes coil head and pod cartridge).
Exclusions:
- Exceeding the warranty period.
- Damage caused by use, maintenance, or storage not in accordance with instructions.
- Damage caused by unauthorized repair.
- Damage caused by the usage of non-UWELL components.
- Damage caused by force majeure.

Verification:

Visit the official UWELL website: www.myuwell.com (via smartphone or PC).
Enter the 16-digit authentic code.
The result will be displayed within a few seconds.
Contact UWELL via e-mail, phone, or website for further assistance.

Customer Service:

For any issues, contact UWELL at service@myuwell.com. UWELL reserves the right of final interpretation in the user manual. Note that the markable area on the product may not be sufficient to mark CE and WEEE as per standard dimensions.