The HAVOK V1 Pod Mod is a compact and versatile vaping device designed for an excellent user experience, featuring adjustable wattage, airflow, and UWELL's Pro-FOCS flavor testing technology.
Function Description
The HAVOK V1 Pod Mod operates as a refillable pod system with a removable coil, offering both DTL (Direct-to-Lung) and MTL/RDL (Mouth-to-Lung/Restricted Direct-to-Lung) vaping experiences depending on the coil used. It features a 0.96-inch OLED screen that clearly displays all operational data, including wattage, voltage, coil resistance, vaping time, and puff count. The device is powered by an internal 1800 mAh battery with 5V/2A fast charging via a Type-C port. Safety features include multiple circuit protections, temperature protection, and self-adaptive power for new coils to prevent burning. The device can be turned on/off with five clicks of the fire button, and its buttons can be locked/unlocked for safe handling.
Important Technical Specifications
- Material: PCTG, Aluminum Alloy
- Size: 100 mm × 42.9 mm × 19.2 mm
- Net Weight: 101 g
- E-Liquid Capacity: 4 ml
- Wattage Range: 5 - 65 W
- Battery Capacity: 1800 mAh
- Charging: Type-C port, 5V/2A fast charging
- Screen: 0.96-inch OLED screen
- Coil Specifications:
- FeCrAl UN2 Meshed-H 0.25Ω HAVOK V1 Coil: 40W-45W (Pre-installed, DTL)
- FeCrAl UN2 Meshed-H 0.6Ω HAVOK V1 Coil: 20W-25W (MTL/RDL)
- Resistance Range: 0.2 - 3Ω
Usage Features
- Power On/Off: Click the fire button 5 times within 2 seconds to turn the device on or off. The screen displays "Hello UWELL" or "Goodbye!".
- Standby: The screen turns off after 8 seconds of no operation, entering standby mode.
- Vaping: Hold the fire button to vape. The device automatically stops firing if the button is held for longer than 8 seconds, displaying "OVER 8S".
- Device Lock/Unlock:
- Hold the fire button and the "–" button for 1 second to lock/unlock the device.
- Hold the fire button and the "+" button for 1 second to lock/unlock the "+/-" buttons.
- Wattage Adjustment: In standby, press the "+/-" buttons to adjust the wattage. Holding the button scrolls faster. Wattage rounds robin when it reaches the end of the range.
- Puff Counter: Records puffs lasting longer than 1 second, up to 9,999 puffs. Hold "+" and "–" buttons for 2 seconds to clear the puff count ("PUFF CLEAR").
- Resistance Detection: Automatic detection. Displays "No Atomizer" for open circuit (no pod or high resistance) and "Atomizer short!" for short circuit (low resistance).
- Low Power Indication: Displays "Low Battery!" when voltage is too low.
- Temperature Protection: Output cuts off if PCBA temperature reaches 80°C, displaying "Too Hot! Please Wait". The device will be usable again after 10 seconds.
- Factory Reset: Hold the fire button, "+" and "–" buttons for 3 seconds. The screen displays "Factory Reset", then exits to defaulted wattage, and the puff counter is cleared.
- Self-Adaptive Power: When a new coil is installed, the device automatically adjusts power to prevent burning.
Maintenance Features
- Coil Installation: Install the coil into the pod, ensuring it is flush with the bottom.
- E-liquid Filling: Connect the pod to the body, slide the top cap off, add e-liquid through the filling hole, then close the sliding top cap. For new pods, let it stand for 10 minutes after filling to prevent coil burning. Ensure the e-liquid level is above the "MIN" line.
- Coil Replacement: Remove the pod from the device, remove the used coil from the pod, and install a new coil.
- Pod Cleaning: Remove the pod from the body, remove the coil (do not clean the coil itself), clean the pod with clean water, and dry it before use.
- Leakage Prevention: Ensure O-rings on the coil are intact during installation. Close the sliding top cap securely after refilling.
- Charging: Charge the battery with a certified high-quality 5V/2A Type-C adaptor and cable. The screen indicates charging status.
- General Care:
- Use a dry and soft cloth to clean the device. Keep away from water or liquids.
- Remove the pod cartridge and store it separately when on a plane to avoid leakage due to pressure changes.
- Avoid placing the device in pockets with hard objects to prevent damage.
- Turn off the device when not in use.
- Charge the device at least once a month.
- Do not disassemble the device.
- Avoid high/low temperatures and humidity during use or storage.
Safety Instructions
- This product is intended for individuals of legal smoking age only.
- Strictly forbidden for young children, pregnant/breastfeeding women, and individuals with heart disease, high blood pressure, diabetes, depression, or asthma.
- Keep out of reach of children and pets.
- Keep away from flammable and explosive materials.
- The company is not responsible for damage or injury caused by user misuse.
Warranty and Verification
- Warranty Period: 180 days from the date of purchase. Covers device and atomizer only (excludes coil head and pod cartridge).
- Warranty Exclusions: Exceeding warranty period, damage from improper use/maintenance/storage, unauthorized repair, use of non-UWELL components, or force majeure.
- Verification: Visit www.myuwell.com and enter the 16-digit authentic code to verify product authenticity.
- Customer Service: Contact service@myuwell.com for any issues.
- UWELL reserves the right of final interpretation in the user manual.
- The product's markable area is insufficient for standard CE and WEEE dimensions.
Need help?
General
To Next Page
