UWELL Hypercar - Operating Mode Selection; Mode Selection and Settings

57
Selecting the Operation Modes
Push the re button three times quickly in succession in order to open the
mode selection. By pressing the adjustment buttons you can change between
the modes Variable Wattage (POWER), Temperature Control Nickel (Ni200),
Temperature Control Stainless Steel (SS316) and Bypass (Mech). Press the re
button to conrm your settings.
Settings in Variable Wattage Mode (Power)
Press the Up or Down button in Power mode to set the watt value Hold down
the corresponding button to change the value more quickly. The watt settings
can be congured from 5 to 80 watts. If you drop below 5 watts or exceed
80 watts, you will automatically switch to the highest or lowest watt value.
UWELL Hypercar – Using the Device