S609A Professional Navigation
S6UPA Navigation Plus – MGU
ONLY 10.25 or 12.3inch monitors
Limitations
Video only The interface inserts ONLY video signals into the infotainment. For inserting
Audio signals either the possibly existing factory audio-AUX-input or a FM-
modulator can be used.
Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera is
only possible while the reverse gear is engaged (no delay of the switching
possible). Automatic switching to the factory rear-view camera does not work
from the video mode of a video source connected to the video input of the
interface.
After market front camera The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching isn’t possible.
Dynamic guidelines Displayed dynamic guidelines are not available in all vehicles.
Factory PDC display The factory PDC display does not work in all vehicles.
Video input signal Only NTSC video sources compatible.
1.2. Checking the compatibility of vehicle and accessories
To Next Page
