STEP BY STEP GUIDE
ON/OFF
a. To turn earbuds on, remove them from their case
b. To turn earbuds off, place them in their case
AUTO-POWER OFF
a. After 10 minutes of inactivity, Hexamove Pro will automatically power off
b. To turn earbuds on after auto-powering off, tap either earbud to reactivate them
FIRST WIRELESS PAIRING
a. Remove Hexamove Pro from their case to automatically turn the earbuds on; if
they have not been paired with an active device previously, they will automatically
enter pairing mode
b. When “V-MODA HEXM PRO” appears in the “new Bluetooth devices” section on
your phone, select it to begin pairing
1
2
3
To Next Page
Loading...
