Fault light (yellow) display and treatment method
1: Check whether the heat dissipation of the heating plate is
normal, 2: Replace the heating plate
1: Replace the heating plate
The internal
temperature of the
machine is
extremely high
1: Check the cooling fan, 2: Stop heating and spraying, and restart
after 10 minutes
1: Check whether there is any foreign matter falling into the spray
nozzle; 2: Replace the fan motor
1: Check the sensor socket, 2: Replace the sensor
Anti-tilt protection
function
Note: After all the fault lights are on, you need to restart the machine until
the fault lights are off before the machine can work normally.
1：检查散热风扇，2：停止加热和喷花，10 分钟后重启
注意：所有故障灯亮后，需要重启机器直到故障灯灭掉机器才能正常工作。
Power cable connection：
For convenient use, there are power supply cable and power supply ex-cable. power
Supply ex-cable can achieve multiple devices connected, and maximum cascade is
To Next Page
Loading...