6pcs.
If you use mobile power plate, be sure to use good quality and match rated power
products. 6 pcs machines requires around 2400 watts, cores should be over 1.5 square.
Material clean(important note):
1. Please empty the powder by turning over the machine and clean remnants
(DMX control address: 221-239) after use.
2. If the remnants are stuck, you have to open
the housing and manually rotate the chain
anticlockwise.
3. We don’t offer free warranty once the
machine stops working without clean process
after use.
Dust clean(important note)
1. Take down the dust-proof net to clean the dust.
2. Unplug the two plugs below machine and shake
It.
Warning:
1. Do not run over 30 seconds for each time.
2. Make sure the device is turned off while refilling.
3. In case of fire, use sand to extinguish. Do not use water.
4. Keep away from children.
To Next Page
Loading...