EasyManua.ls Logo

V-TAC SMART LIGHT VT-5556 - User Manual

V-TAC SMART LIGHT VT-5556
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Important Safety Instructions
To reduce the risk of injury or damage, read these safety
instructions carefully and keep them at hand when setting
up, using, and maintaining this device.
• This device can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of this device in a safe way and understand the
hazards involved.
• Children should be supervised to ensure they do not play
with this device.
• Cleaning and maintenance shall not be performed by
children without adult supervision.
• This device is only to be used with the power supply unit
provided.
• For the purposes of recharging the battery, only use the
detachable power supply unit provided with this device.
• The battery must be removed from this device before
this device is disposed of. To remove the battery from
this device, first remove the screws on the bottom, then
remove the battery by disconnecting the quick connector.
• The used battery should be placed in a sealed plastic
bag and disposed of safely according to local environ-
mental regulations.
• The external flexible cable or cord of the power supply
unit cannot be replaced; if the cord is damaged, the
power supply unit shall be disposed of.
• This device is for indoor use only.
• This device is not a toy. Do not sit or stand on this
device. Small children and pets should be supervised
when this device is operating.
• Store and operate this device in room temperature
environments only.
• Clean with a cloth dampened with water only.
• Do not use this device to pick up spills of bleach, paint,
chemicals, or anything wet.
• Do not use this device to pick up anything that is
burning or smoking.
• Before using this device, pick up objects like clothing
and loose paper. Lift up cords for blinds or curtains, and
move power cords and fragile objects out of the way. If
this device passes over a power cord and drags it, an
object could be pulled off a table or shelf.
This is the safety alert symbol. This symbol
alerts you to potential hazards that could
result in property damage and/or serious
bodily harm or death.
WARNING SYMBOLS USED
1

Questions and Answers

  • M
    marvinwilliamsAug 5, 2025
    How to check if the wheel is stuck on a V-TAC SMART LIGHT VT-5556 Vacuum Cleaner?
    • J
      Justin OwensAug 5, 2025
      If your V-TAC Vacuum Cleaner prompts you to check the wheel, it means the wheel is jammed. Inspect the wheel for any entangled foreign objects and remove them to resolve the issue.
  • M
    Mrs. Morgan WaltersAug 11, 2025
    What to do if V-TAC SMART LIGHT VT-5556 side brush is tangled or jammed?
    • J
      John BowmanAug 11, 2025
      If your V-TAC Vacuum Cleaner is showing this message, it indicates abnormal edge brushing. Check the side brush for any wire entanglements and clean them up.
  • J
    Jillian SmithAug 20, 2025
    What to do if the dust box is not installed in my V-TAC SMART LIGHT VT-5556?
    • K
      Kendra RomeroAug 20, 2025
      If the dust box is removed and not installed, return the dust box to the V-TAC Vacuum Cleaner and press the cleaning key again.
  • P
    Pamela KerrAug 27, 2025
    What to do if V-TAC SMART LIGHT VT-5556 wheels are off the ground?
    • L
      lisa96Aug 27, 2025
      If the wheels of your V-TAC Vacuum Cleaner are off the ground, it means the robot is suspended. Put the Robot back on the ground and press the cleaning key again.

Summary

Important Safety Instructions

INTRODUCTION

Package Contents

Product Composition and Part Name

Front Laser Robot

Details components and sensors on the front of the robot.

Back Laser Robot

Describes components and sensors on the back of the robot.

Product Usage - Preparation

Charging The Product

Using The Water Tank

App Installation Instructions

App Modes and Features

App Display Functions

Cleaning and Maintenance

Maintenance: Dust Box

Instructions for cleaning and maintaining the dust box and filters.

Maintenance: Water Tank & Mopping Pad

Steps for cleaning the water tank and mopping pad.

Maintenance: Rolling Brush & Side Brush

Guidance on cleaning and replacing the robot's brushes.

Maintenance: Charging Pins and Sensors

How to clean charging pins and sensors for optimal performance.

Troubleshooting

Product Parameters

V-TAC SMART LIGHT VT-5556 Specifications

General IconGeneral
BrandV-TAC
ModelSMART LIGHT VT-5556
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals