V2 RXP2S220 User Manual

RXP2S220 - RXP2S120
RXS2KB220 - RXS2KB120
I
L n. 030
E
DIZ. 28/09/2009
V2 S.p.A.
Corso Principi di Piemonte, 65/67 - 12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11 fax +39 01 72 84 050
i
nfo@v2home.com www.v2home.com

V2 RXP2S220 Specifications

General

Receiver Type	GNSS
GPS	Yes
GLONASS	Yes
BeiDou	Yes
Galileo	Yes
QZSS	Yes
SBAS	Yes
RTK Accuracy	8 mm + 1 ppm
Static Accuracy	2.5 mm + 0.5 ppm

Summary

Important Remarks

Product Programming

Monostable Mode

Activates the relay during TX transmission; it turns off automatically when transmission stops.

Bistable Mode

Activates the relay on the first TX transmission and turns it off on the second transmission.

Timer Mode

Activates the relay for a set time (max 7.5 minutes) upon TX transmission.

Monostable Function Programming

Procedure to program the monostable function for receiver channels.

Timer Function Programming

Procedure to program the timer function for receiver channels.

Bistable Function Programming

Procedure to program the bistable function for receiver channels.

Code Replacement

Procedure to replace an existing memorized transmitter code with a new one.

Rolling Code Mode

Activates or disables rolling code for enhanced security, preventing code duplication.

Total Clearing

Procedure to clear all stored codes from the receiver's memory.

Altering Function of Memorized Code

Overwrites an existing memorized code with a new function or code.