V2 Wally Series User Manual

Wally (Pr. 1.3)
FCC ID: RSK-V2-WALLY
Fig. 1
IL n. 163-A
EDIZ. 05/09/2006
V2 ELETTRONICA SPA
Corso Principi di Piemonte, 65/67 - 12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11 fax +39 01 72 84 050
info@v2elettronica.com www.v2home.com
Modello
Model
Modèle
Modell
Modelo
Frequenza
F
requency
F
réquence
Frequenz
Frecuencia
Alimentazione
P
ow
er supply
Alimentation
Stromversorgung
Alimentación
Contatti relè
Rela
y contacts
Contacts relais
Relaiskontakte
Contactos relé
Temperatura
T
emperature
T
empérature
Temperatur
Temperatura
Consumo
Consumption
Consommation
Verbrauch
Consumo
Sensibilità
Sensibility
Sensibilité
Empfindlichkeit
Sensibilidad
S/N
Dimensioni
Size
Dimensions
Abmessungen
Dimensiones
Peso
Weight
Poids
Ge
wicht
P
eso
WALLY1 - WALLY2 - WALLY4
W
ALL
Y4PLUS
433,92 MHz
12 VAC - VDC
(DIP 1 ON)
24 VAC - VDC
(DIP 1 OFF)
1A / 30VDC -20
÷
+60°C
17mA stand b
y
≥ -103 dBm
> 17dB
@ 100dBm
m=100%
132 x 26 x 74
mm
105 g
W
ALL
Y1/434 - W
ALLY2/434
WALLY4/434 - WALLY4/434
434,15 MHz
WALLY1/868 - WALLY2/868
WALLY4/868 - WALLY4/868P
868,3 MHz

V2 Wally Series Specifications

General

Brand	V2
Model	Wally Series
Category	Receiver
Language	English

Summary

Wally Product Overview and Specifications

Technical Specifications Table

Details on models, frequency, power supply, relay contacts, temperature, consumption, sensitivity, dimensions, and weight.

Radio Programming Procedures

Remote Radio Learning

Procedure to memorize new transmitters by radio without removing the receiver from installation.

Monostable, Bistable, and Timer Programming

Instructions for programming monostable, bistable, and timer functions for receiver channels.

Rolling Code Mode

Enabling or disabling the ROLLING CODE mode to prevent code duplication.

Substitutive Transmitter

Using a special transmitter to replace stored codes remotely.

Full Code Erasing

Procedure to clear all stored transmitter codes from the receiver's memory.

Programming Lock

Inhibits further programming of the receiver except via dedicated tools.

Receiver Features and Compliance

Relay Contact Configuration

Information on changing output relay contacts from normally open to normally closed.

Important Remarks and FCC Compliance

Device compliance with FCC rules and potential interference conditions.

EC Directive Conformity

Statement of conformity with relevant EC directives and standards.