Need help?Do you have a question about the V2 Wally and is the answer not in the manual?
Declares compliance with EU directives 2014/53/EU and ROHS2 2011/65/CE.
Details the receiver's purpose for automation controls and general electrical circuits.
Lists key specifications like frequency, power supply, relay contacts, and temperature range.
Explains normally open (N.O.) contacts and N.C. configuration for relays.
Guides on setting the timer function for relays, including time selection via LED flashes.
Instructions on how to select the receiver channel for programming using the P1 button.
Procedure for programming the monostable relay function using transmitters.
Steps to program the bistable relay function, including transmitter memorization.
Enables memorizing new transmitters wirelessly for the Personal Pass system.
Allows replacing stored transmitter codes wirelessly via a special transmitter.
Details on enabling or disabling the rolling code function for Personal Pass.
Inhibits receiver programming via P1 or radio, requiring WINPPCL for changes.
Procedure to erase all stored transmitter codes and reset the receiver.
To Next Page
General
