Vacmaster VHB305M - Maintenance; Installing & Cleaning Reusable Cloth Filter

11
MAINTENANCE
1. Verify that the power cord is disconnected from the outlet (g.1).
2. Disconnect the hose from the vacuum (g.2).
3. Undo the latches and remove the power head from the collection tank (g. 3).
4. Clear all dirt or debris from the collection tank and hose (g.4).
5. Clean or replace the lters (g.5).
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT! Clean or change the lter regularly for best performance. ALWAYS USE DUST
FILTER FOR DRY VACUUMING. If the machine is used without the cartridge lter, the motor will
burn out and the warranty will be voided. Always keep spare dust lters on hand.
NOTICE! The lter included is made of high quality material designed to stop small dust particles.
The lter should be used for dry pick-up only. A dry lter is necessary to pick up dust. If the
dust lter is wet, it will clog quickly and be very difcult to clean. Handle the lter carefully when
removing it for cleaning and replacing it. Check the lters for tears or small holes, a small hole
can let dust pass through and out of the lter. Do not use a lter with holes or tears; replace it
immediately.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
BEFORE REMOVING THE POWER HEAD FROM COLLECTION TANK.
INSTALLING & CLEANING REUSABLE
CLOTH FILTER
INSTALLING REUSABLE CLOTH FILTER
1. Verify that the power cord is disconnected from the outlet (g.1).
2. Remove power head and place in upside down position.