Vacmaster VHB305M - Installing & Cleaning Foam Sleeve Filter

12
3. Slide reusable cloth lter down over the lter cage making sure the whole cage is covered
(g.2 & 3) .
4. Replace the power head on to the collection tank.
1. With the removed power head in the upside down position, carefully remove foam sleeve lter
(g. 4).
2. Use a mild soap and water solution to wash foam sleeve lter and rinse with clean water (g. 5).
3. Allow lter to air dry before installing and using again.
1. Verify that the power cord is disconnected from the outlet (g.1).
2. Remove power head and place in upside down position. Follow instructions to remove cloth
lter.
3. Carefully slide foam sleeve lter down over the lter cage making sure the whole cage is
covered (g. 2 & 3).
4. Replace the power head onto the collection tank.
1. With the removed power head in the upside down position, carefully remove foam sleeve lter
(g. 4).
2. Use a mild soap and water solution to wash foam sleeve lter and rinse with clean water (g. 5).
3. Allow lter to air dry before installing and using again.
REMOVING AND CLEANING REUSABLE CLOTH FILTER
INSTALLING FOAM SLEEVE FILTER
CLEANING FOAM SLEEVE FILTER
INSTALLING & CLEANING FOAM SLEEVE
FILTER