Why my Vacmaster Vacuum Cleaner does not work?
If your Vacmaster Vacuum Cleaner isn't working, there could be a couple of reasons. First, check the power supply and fuse to make sure the unit is receiving power. Second, a functional fault in the power cord, switch, or motor could be the cause. In this case, have the damaged part checked by qualified personnel or contact the after sales helpline.
What to do if the power tool take-off socket does not work on my Vacmaster VK1630SWC Vacuum Cleaner?
If the power tool take-off socket isn't working on your Vacmaster Vacuum Cleaner, several factors could be the cause. Start by checking that the power tool wattage is compatible with the power take-off socket. Also, ensure the switch is in position II. Other potential issues include a full dust bag (replace it), blockages in the suction nozzle, hose, or tank inlet (check for obstructions), or a blocked cartridge filter (remove and clean it).
How to fix dust escaping from the motor cover of my Vacmaster VK1630SWC?
If dust is escaping from the motor cover of your Vacmaster Vacuum Cleaner, it might be due to a missing or damaged cartridge filter; put in a cartridge filter or replace it. Another reason might be misusing the cartridge filter when wet vacuuming, which damages the filter. Replace the damaged cartridge filter with a new one when dry vacuuming. Finally, misusing the foam filter when dry vacuuming can also cause this issue; replace the foam filter with the cartridge filter.
General| Brand | Vacmaster |
|---|---|
| Model | VK1630SWC |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page