Vacmaster VK809PWR 0201 User Manual (English)

Questions and Answers:

J
Jason CruzJul 28, 2025
What to do if my Vacmaster Vacuum Cleaner will not operate?
- D
  deanmarthaJul 29, 2025
  If your Vacmaster Vacuum Cleaner isn't turning on, there could be several reasons. First, check the power supply, cord, breakers, and fuses. Also, unplug the vacuum and inspect the power cord for any damage; if damaged, have it repaired by a professional or contact customer service. Make sure the On/Off switch is in the correct position and the desired cleaning mode is selected by pressing the ON ‘I’ button on the power head. Lastly, ensure the collection tank isn't full; if it is, empty it.
H
Harold CummingsAug 2, 2025
Why does my Vacmaster VK809PWR 0201 Vacuum Cleaner have low suction and high noise?
- E
  edwardsjenniferAug 2, 2025
  If your Vacmaster Vacuum Cleaner has low suction power and is making unusual noises or vibrations, start by checking for blockages in the nozzle, hose, or tank inlet and remove any obstructions. Then, inspect the cartridge filter; if it's clogged with fine dust, take it off and clean it or replace it with a new one. Finally, ensure the collection tank is empty of any liquid waste and that the float valve underneath the filter can move freely.
K
kimberlyleonardAug 8, 2025
How to fix Vacmaster VK809PWR 0201 Vacuum Cleaner when cleaning solution does not spray out?
- V
  vernon06Aug 8, 2025
  If the cleaning solution isn't spraying out from your Vacmaster Vacuum Cleaner, first ensure that the detergent mode button is pressed. Check if the cleaning solution tank is empty and refill it if needed. Verify the fittings and connections of the tubes, making sure there are no kinks. If the water pump inside the power head overheats, let the vacuum cool down before restarting it.
C
Connor HerreraAug 13, 2025
Why is dust coming out of my Vacmaster VK809PWR 0201 motor cover?
- H
  heatonAug 13, 2025
  If dust is coming out from the motor cover of your Vacmaster Vacuum Cleaner, it could be due to a missing or damaged cartridge filter; attach or replace it. If you're dry vacuuming, ensure you're using the cartridge filter instead of the foam wet filter. Also, check the exhaust filter and attach or replace it if it's missing or damaged.
S
Sheri JonesAug 17, 2025
What to do if Vacmaster VK809PWR 0201 remote control will not operate?
- M
  Michelle RayAug 17, 2025
  If the remote control for your Vacmaster Vacuum Cleaner isn't working, the battery may be dead; replace it with a new one. If that doesn't work, the remote control might not be programmed. If the issue persists, contact customer service.
W
wendy63Aug 23, 2025
Why is foam leaking from my Vacmaster VK809PWR 0201 power head?
- R
  roy78Aug 23, 2025
  If foam is leaking from the outlet on the power head of your Vacmaster Vacuum Cleaner, it's likely due to using an incorrect cleaning solution or an incorrect mix ratio. Use the manufacturer’s cleaning solution or a high-quality, low-foaming liquid carpet cleaning solution, and ensure it's mixed with water at the correct ratio.