Vacmaster VQ1220SC - Troubleshooting

11
GB
TROUBLESHOOTING
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
cartridge lters as necessary. Replace full dust bags to prevent performance drops. A performance
drop with clean lters can only be caused by a blockage in the tools or the hose.
PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does
not work.
No power. Check the power supply and fuse.
Functional fault in the power
cord, switch, or motor.
Have the damaged part checked by
qualied personnel or contact the after
sales helpline.
Dust is escaping from
the motor cover.
The cartridge lter is missing
or damaged.
Put in a cartridge lter or replace it.
Misuse the cartridge lter
when wet vacuuming, causing
the damage of cartridge lter.
Replace the damaged cartridge lter
with a new one when dry vacuuming.
Misuse the foam lter when
dry vacuuming.
Replace the foam lter with the
cartridge lter.
Power tool take-off
socket does not work.
Power tool wattage is not
compatible with the power tool
take - off socket.
Check the wattage is compatible with
the power tool take - off socket.
Incorrect operating mode
selected.
Ensure the switch is moved into
position II.
Low suction power
and high operating
noise / vibrations.
Dust bag is full. Replace the dust bag.
Suction nozzle, hose, or tank
inlet is blocked.
Check the suction nozzle, hose, and
tank inlet for obstructions.
Cartridge lter is blocked. Remove the cartridge lter and clean.
Float valve has closed.
Empty the container of any liquid
waste and ensure the oat value
located underneath the lter is able to
move freely.