Receipt of delivery vacon • 13
24-hour support: +358-40-8371 150 • Email: vacon@vacon.com
3. RECEIPT OF DELIVERY
Vacon NXL frequency converters have undergone scrupulous tests and quality checks at the factory
before they are delivered to the customer. However, after unpacking the product, check that no
signs of transport damages are to be found on the product and that the delivery is complete
(compare the type designation of the product to the code below).
Should the drive have been damaged during the shipping, please contact primarily the cargo
insurance company or the carrier.
If the delivery does not correspond to your order, contact the supplier immediately.
3.1 Type designation code
Figure 3-1. Vacon NXL type designation code for sizes MF2 and MF3
NXL 0004
C 1 N 1 SSS 00
5
Product range: NXL = NX Light
Nominal current (low overload)
Maximum continuous current of the unit at 40 deg
e.g. 0007 = 7 Amps.
Nominal mains voltage:
2 = 208–240Vac, 5 = 380–500Vac
Control keypad:
B = No control keypad
C = standard seven-segment keypad
EMC emission level:
N = No EMC emission protection. An external EMC filter needed
Hardware modifications; Supply - Mounting - Boards
SSS = Standard
SDS = Din rail mounting
Enclosure classification:
1= IP20
Brake chopper
0 = no
brake chopper
1 = internal brake chopper
Factory installed I/0 boards and expanders:
00= no board,
AA = OPT-AA board,
AI = OPT-AI board
C3 = profibus board
11553_uk
H = Fulfils EN61800-3:2004+A1:2012, category C2. External RFI-filter required
To Next Page
Loading...
