Vacon 100 INDUSTRIAL User Manual

vacon 100 industrial
vacon 100 flow
vacon 100 hvac
vacon 100 x
ac drives
modbus tcp/udp and modbus rtu
user manual
®
®
®
®

Vacon 100 INDUSTRIAL Specifications

General

Brand	Vacon
Model	100 INDUSTRIAL
Category	DC Drives
Language	English

Summary

1. Safety

1.1 Danger

Details the critical dangers associated with live components and electrical hazards.

1.2 Warnings

Provides essential safety warnings regarding AC drive installation, operation, and maintenance.

1.3 Earthing and Earth Fault Protection

Explains the requirements for proper earthing and protective conductor sizing to ensure safety.

3. Modbus Technical Data

3.1 Modbus RTU Protocol

Details the technical specifications for the Modbus RTU communication protocol.

3.2 Modbus TCP Protocol

Outlines the technical specifications for the Modbus TCP communication protocol.

3.4 Connections and Wiring

4. Installation

4.1 Installation in Vacon 100 Family AC Drives

Step-by-step guide for installing the AC drive in Vacon 100 family units.

4.1.1 Prepare for Use Through Ethernet

Instructions for preparing the drive for Ethernet communication setup.

4.1.2 Prepare for Use Through RS485

Instructions for preparing the drive for RS485 communication setup.

4.2 Installation in Vacon 100 X

Specific installation procedures for Vacon 100 X series AC drives.

4.2.1 Prepare for Use Through Ethernet

Steps to prepare Vacon 100 X for Ethernet communication.

4.2.2 Prepare for Use Through RS485

Steps to prepare Vacon 100 X for RS485 communication.

5. Fieldbus Parametrization

5.1 Fieldbus Control and Basic Reference Selection

Configuring fieldbus control and selecting basic reference parameters.

5.1.2 Enabling Modbus Protocol

5.2 Modbus RTU Parameters and Monitoring Values

RTU specific parameters and monitoring values for Modbus communication.

5.3 Modbus TCP/UDP Parameters and Monitoring Values

Parameters and monitoring values for Modbus TCP/UDP communication.

5.3.1 Ethernet Common Settings

5.3.8 Modbus TCP/UDP Settings

6. Communications

6.1 Data Addresses in Modbus Messages

6.2 Supported Modbus Functions

6.3 Modbus Data Mapping

6.3.4 Holding Registers and Input Registers

6.3.6 FB Process Data IN

6.3.7 FB Process Data OUT

6.3.13 Fault History

6.3.14 Fault History with 16-bit Error Codes

6.4 Modbus TCP/UDP Communication and Connection Timeout

7. Fault Tracing

7.1 Typical Fault Conditions

7.3 Other Fault Conditions

8. Quick Setup

10. Appendix 2 - Control and Status Word

10.1 Control Word Bit Description

Details the function and value of each bit within the Control Word.

10.2 Status Word Descriptions

Explains the meaning of each bit within the Status Word.