Communications vacon • 37
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
6
Operation day counter as seconds
This counter in registers 40011d to 40012d holds the value of operation days as seconds in a 32-bit
unsigned integer.
Operation day counter
This counter in registers 40001d to 40005d holds the value of operation days counter. The values are
read only.
6.3.10 Resettable operation day counter
This register holds the value for resettable control unit operating time counter (trip value). The
values are read only.
For resetting this counter see Chapter 6.3.2.
Resettable operation day counter as seconds
This counter in registers 40111d to 40112d holds the value of resettable operation days as seconds
in a 32-bit unsigned integer.
Resettable operation day counter
This counter in registers 40101d to 40105d holds the value of operation days counter.
Table 25. Operation days counter as seconds
Address Description
40011 High data
40012 Low data
Holds the counter value as seconds.
Table 26. Operation day counter
Holding register address Input register address Purpose
40001 1 Years
40002 2 Days
40003 3 Hours
40004 4 Minutes
40005 5 Seconds
Table 27. Resettable operation days counter as seconds
Address Description
40111 High data
40112 Low data
Holds the counter value as seconds.
Table 28. Resettable operation day counter
Holding register
address
Input register
address
Purpose
40101 101 Years
40102 102 Days
40103 103 Hours
40104 104 Minutes
40105 105 Seconds
To Next Page
Loading...
