6.1.2
State leds
State LEDs light up according to state indicators READY, RUN and FAULT of the inverter. If all LEDs
blink the drive is uncommissioned.
= Lights up with DC voltage connected to the converter with no active failure. The state in-
dicator READY also lights up simultaneously.
= Lights up when the converter is running.
= Blinks when there are unsafe running conditions and the unit has therefore stopped
(fault trip). Simultaneously, the state indicator FAULT blinks in the display and shows a
description of the fault; see chapter Active Faults.
6.1.3
Text lines
The three text lines (•,••,•••) provide the user with information about the current location within the
menu structure of the panel, separate from information related to the operation of the unit.
• = Indication of the place in the panel; it shows the menu symbol and number, parameter,
etc.
Example: M1 = Menu 1 (Display); P1.3 = Generated power
•• = Description line; Shows the description of the menu, value or fault.
••• = Value line; it shows numeric values and reference texts, parameters, etc, as well as the
number of submenus available for each menu.
6.1.4
Panel push buttons
The alphanumeric control panel of the inverter VACON 8000 SOLAR has 9 push buttons used to con-
trol the inverter and to monitor values.
To Next Page
Loading...
