Why is the lid on my VacPak-It Food Saver not opening properly?
If the lid on your VacPak-It Food Saver is not opening or opens very slowly, ensure all cycles are complete. If needed, adjust cycle times. You may also need to check the solenoid valve, control solenoid valve, piston, silicone tubing, and circuit board.
What to do if the CLO error is showing on VacPak-It Food Saver?
If the CLO error is showing on your VacPak-It Food Saver, check the silicone tubing for leaks. Also, check the control solenoid valve, solenoid valve, and circuit board.
What to do if the front circuit board of VacPak-It Food Saver does not come on?
If the front circuit board on your VacPak-It Food Saver does not come on, ensure the unit is plugged in and turned on.
Why does the pump start when the lid is open on my VacPak-It 186VMC20F Food Saver?
If the pump starts while the lid is still open on your VacPak-It Food Saver, check the microswitch and the circuit board.
Step-by-step guide for placing items, sealing, and completing the vacuum cycle.
Remedies for the unit failing to power on or display illuminated.
Solutions for achieving a proper vacuum level and seal.
Troubleshooting steps for bags that lose vacuum after sealing.
Guidance for ensuring a complete and adequate seal on pouches.
General| Brand | VacPak-It |
|---|---|
| Model | 186VMC20F |
| Category | Food Saver |
| Language | English |
To Next Page
