To Next PageTo Next Page
Need help?Do you have a question about the vacuubrand PC 2001 Vario and is the answer not in the manual?
General| Max. pumping speed | 2.0 m³/h |
|---|---|
| Flow Rate | 2.0 m³/h |
| Cooling | Air-cooled |
| Motor protection | IP 20 |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Motor speed | 1500 rpm |
| Permissible ambient temperature | 10 - 40 °C |
Covers unpacking, usage, electrical, ventilation, and general handling.
Addresses pressure limits, exhaust safety, coolant, catchpots, and system stability.
Details risks with explosive, flammable, toxic substances, and dust.
Covers motor protection, temp limits, restart, and maintenance.
Details pumping speed, vacuum, pressure, temp, electrical, and physical characteristics.
Outlines controller features like pressure transducer, interface, and protection ratings.
Explains pump operation, temperature effects, condensation, and gas ballast usage.
Guides on setting target pressure, adjusting it, and manual determination.
Covers automatic mode activation, switching, and auto shut-off settings.
Describes initial state, starting/stopping control, and venting procedures for continuous pumping.
Explains initial state, starting/stopping control, and venting for VACUU•LAN mode.
Provides a table listing common faults, their possible causes, and recommended remedies.
Provides detailed instructions for replacing pump diaphragms and valves.
Details required forms, decontamination, and process for returning equipment.
