B
Brandon MendezSep 14, 2025
What to do if VADDIO Document Camera web UI is available but the camera does not respond to commands sent via RS-232 connection to the OneLINK device?
- GGeorge AndersonSep 14, 2025
If the VADDIO Document Camera's web UI is accessible but it's not responding to commands sent via the RS-232 connection to the OneLINK device: 1. Ensure the RS-232 cable connecting to the OneLINK device is properly connected and functioning. Try using a known good cable. 2. Verify that the camera's baud rate setting matches the settings on the controlling device. You can find the camera's baud rate setting on the System page in the web UI.