ii
Contents
Overview 1
What's in this Guide 1
Features 1
A Quick Look at the Camera 2
Front of the Camera 2
Back of the Camera 3
Connections 4
Don’t Void Your Warranty! 4
Before You Install the Camera 4
Cabling Notes 4
Basic Connections for Conferencing 5
Connections – Using the Camera with a Room Audio System 6
Connections – Using the Camera as a Sound Bar 6
Mounting the HuddleSHOT Camera 7
Installing the HuddleSHOT Wall Mount 7
Installing the HuddleSHOT Camera on the Wall Mount 7
Optional Adjustable HuddleSHOT Mount 8
Tabletop Use 8
Wall Mounting 8
Installing on a Compatible Above/Below Mount 8
Powering Up the Camera 9
Status Indicator Light 9
Multifunction Button 9
Initial Device Set-Up 10
Initial Device Set-Up Using the Vaddio Device Controller 10
Initial Device Set-Up Using the Vaddio Deployment Tool 11
Manual Access and Initial Device Set-Up 12
About the Web Interface 12
Getting the Camera's IP Address for Manual Access 12
If the Camera Is At 169.254.1.1 13
Initial Access to the Web Interface 13
Completing the Initial Device Set-up 14
System Administration 15
Configuring Access and Other Security Settings 15
Configuring the Camera for Your Network 16
Configuring the Device with a Static IP Address 16
Changing the Camera's Hostname 16
Specifying Time Zone and NTP Server 17
Adding Room Information to the Camera's Web Interface 17
Configuring Camera Behavior 18
To Next Page
Loading...
