EasyManua.ls Logo

VADO celsius User Manual

VADO celsius
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
celsius
Vado
Wedmore Road, Cheddar, Somerset, England BS27 3EB
tel 01934 744466. fax 01934 744345
technical@vado-uk.com
www.vado-uk.com
Guarantee
Customer/technical services
For any technical or installation queries please contact Vado on 01934 745163.
GUARANTEE REGISTRATION
NAME
ADDRESS
RETAILER
ADDRESS
PURCHASE DATE
PRODUCT DESCRIPTION
WHO INSTALLED THE PRODUCT?
FOR VADO USE
POSTCODE
POSTCODE
ARTICLE NUMBER (SEE BOX)
RETAILER
PLUMBER BUILDER SELF
This product is guaranteed against manufacturing defects from the date of purchase until the expiry of the relevant
guarantee period shown below.
The guarantee is only valid if:-
1. The product has been installed, used and maintained in accordance with Vados instructions and subjected to
normal use only.
2. The defect is not due to use of an unsuitable or inadequate water or power supply.
3. The defect is not due to accident, misuse, neglect or repair other than by Vado or Vado authorised agents or
damage caused by foreign objects or substances.
4. We have received from you the completed Guarantee Registration Form. Vado accepts no responsibility for any
forms lost in the post and returns by registered means is therefore recommended.
Under this guarantee (which is non-transferable) Vado will, at its option, repair or replace free of charge any product
(or replacement part) found to be defective. The guarantee does not extend to any consequential loss or damage.
After repair or replacement the relevant guarantee period will be calculated from the original date of purchase.
The relevant guarantee periods are:-
1. Twelve years on chrome nish products.
2. Six years on Vado Identity products.
3. Three years on all other products with the exception of Stuart Turner Pumps which carry a 2 year Guarantee on
Monsoon Range and 1 Year Guarantee on Showermate Range.
All claims under the guarantee must be submitted in writing to the person who supplied the product to you and
must be received no later than the last day of the relevant guarantee period. All claims must be accompanied by
proof of purchase (sales receipt or delivery note).
Vado operates a policy of continuous product development and therefore reserves the right to change the product,
packaging and documentation specications without notice.
This guarantee is in addition to and does not aect your statutory rights as a consumer.
Exposed ¾” thermostatic shower valve
Installation & maintenance instructions
Please leave these instructions with the customer
Question and Answer IconNeed help?

Do you have a question about the VADO celsius and is the answer not in the manual?

VADO celsius Specifications

General IconGeneral
Frequency50/60 Hz
Accuracy±0.5 °C
Temperature Range-10°C to +50°C
Input Voltage24 V DC
Output Voltage24 V DC
Operating Temperature0 to +50°C

Summary

Product Guarantee and Registration

Important Installation and Usage Guidelines

Installation Compliance and Recommendations

Ensures installation meets water supply regulations and recommends qualified plumbers for safety.

General Installation and Water System Advice

Covers mixer valve suitability, water system requirements, balanced supplies, and pipework flushing.

Mixer Care and Maintenance

Provides guidance on cleaning the mixer to preserve its finish and avoid voiding the guarantee.

Maintenance Procedures

Inlet Filter Cleaning

Instructions for removing and cleaning inlet filters to maintain valve performance.

Thermostatic Cartridge Filter Cleaning

Detailed process for cleaning filters located within the thermostatic cartridge.

Operation and Specifications

Product Dimensions

Provides key physical measurements of the thermostatic shower valve.

Operating Pressure and Temperature

Details hot water supply temperature and operating pressure requirements for the valve.

Installation and Temperature Resetting

Installation Steps

Guidance on connecting water supply, offset connectors, and ensuring valve support.

Temperature Calibration and Resetting

Instructions for adjusting the valve's temperature setting and recalibrating it.

Related product manuals