VAF instruments Viscosense 3 - 17. DRAWINGS; 17.1 VISCOSENSE3 SENSOR AND SENSOR HOUSING

29
Display
message
V
iscosity
output [mA]
Temperature
output [mA]
Recovery action
(attempt)
Fault description
0 0 restart Temperature out of range
0 0 restart Frequency of pendulum out of range
0 0 restart Unstable phase of pendulum or no pendulum
Received measuring signal (Urec) too low (eg
very high viscosity)
Actual
(open loop)
Actual
(open loop)
NA Open loop of analogue output signal(s)
Any other figure or letter indicates an error in the electronics or software.