Vaillant ecoTEC plus 832 Installation Manual

0020308120_02 Air/flue pipe installation manual 5
1.4 CE certification
The heat generators are certified as gas-fired
boilers with associated flue systems in ac-
cordance with the Gas Appliances Regula-
tion (EU) 2016/426. This set-up instructions
are a component of the certification and are
cited in the type testing certificate. In compli-
ance with the regulatory statutes of these set-
up instructions, the proof of usability of the
elements identified by Vaillant article num-
bers that are designed for the air/flue pipe
is provided. If you do not use certified ele-
ments for the Vaillant air/flue pipe when in-
stalling the heat generators, this voids the CE
conformity of the heat generator. We there-
fore strongly recommend that you fit Vaillant
air/flue systems.
1.5 Regulations (directives, laws,
standards)
▶
Observe the national regulations, stand-
ards, directives, ordinances and laws.

Vaillant ecoTEC plus 832 Specifications

General

Model	ecoTEC plus 832
Category	Boiler
Mounting	Wall-mounted
Fuel Type	Natural Gas
ErP Heating Efficiency Class	A
ErP Water Heating Efficiency Class	A
DHW Flow Rate (l/min)	13
Dimensions	720 x 440 x 338 mm
Max. working pressure	3 bar
Warranty	5 years
Efficiency	89.3%
Type	Combination