Need help?Do you have a question about the Vaillant VUW 196/5-5 (H-GB) ecoTEC plus 825 and is the answer not in the manual?
General| Model | ecoTEC plus 825 |
|---|---|
| Fuel Type | Natural Gas |
| Efficiency | 94% |
| ErP Water Heating Efficiency | A |
| Flow Rate (Hot Water at 35°C Rise) | 10.4 l/min |
| Dimensions (H x W x D) | 720 x 440 x 338 mm |
| Warranty | 5 years |
| Mounting | Wall-mounted |
| CH Output (kW) | 19.6 |
| Output (Heating) | 19.6 kW |
| DHW Temperature Range | 35 - 60 °C |
| Pressure (Heating) | 3 bar |
| Boiler Type | Combination |
Classifies warnings by severity using symbols and signal words for potential dangers.
Defines the product's specific purpose and outlines limitations for user safety.
Provides overarching safety guidelines, including risks from gas, materials, and modifications.
Details immediate actions to take if gas is smelled in the building.
Outlines actions to take if flue gas is smelled in the property.
Prohibits the use or storage of explosive or flammable materials near the product.
Warns against modifying the product, its safety devices, or its environment.
Highlights the importance of ensuring a sufficient supply of combustion air.
Warns that certain substances can cause corrosion to the product.
Advises on preventing frost damage by ensuring the heating installation remains operational.
Stresses the need for professional maintenance and repairs to ensure safety.
Advises users to observe all operating instructions for system components.
Recommends keeping the manual and other documents safe for future use.
Lists the product article numbers to which these instructions are applicable.
Shows a diagram illustrating the external design of the product.
Identifies and labels the product's main control buttons and display.
Details the symbols and functions of the operator control panel.
Explains the meaning of various symbols shown on the product's display.
Describes the information found on the product's identification plate.
States the location of the product's serial number.
Explains the meaning of the CE label and declaration of conformity.
Discusses products endorsed for energy efficiency by the Energy Saving Trust.
Mentions Vaillant's membership and promotion of the Hot Water Association.
Explains the Benchmark scheme for installation and servicing quality standards.
Outlines how to use operator control elements to adjust product settings.
Describes the information shown on the product's basic operating display.
Explains the structure and navigation of the menu display.
Differentiates between end-user and installer adjustment levels.
Provides guidance and warnings regarding enclosing the product in a cabinet.
Instructs on opening isolator devices, advising consultation with an installer.
Details the procedure for starting up the product after the casing is closed.
Explains how to turn the product on using the main on/off button.
Guides users on how to change the product's display language.
Explains how to adjust the desired heating flow temperature.
Provides instructions for setting hot water temperature, with scald warnings.
Describes how to activate/deactivate Comfort mode for faster hot water delivery.
Explains how to activate cylinder charging for integrated hot water systems.
Guides on setting the target temperature for a shift-load cylinder.
Covers switching off heating mode and hot water generation functions.
Explains how to ensure the correct water pressure in the heating system.
Details the frost protection function and methods for draining the installation.
Directs users to tables for diagnosing and resolving product faults.
Explains how to view current operating status codes on the display.
Presents a table of common faults, their causes, and corrective measures.
Guides on temporarily switching off the product, noting frost protection.
States that permanent decommissioning must be performed by a professional.
Advises on proper disposal of the product and batteries according to symbols.
Details the two-year guarantee terms and annual service requirement.
Recommends maintenance agreements and provides contact details for service.
Provides a table of settings and parameters accessible at the operator level.
Lists and explains various status codes for heating and hot water modes.
To Next Page