Need help?Do you have a question about the Vaillant VUW 246/7-2 (H-GB) and is the answer not in the manual?
General| Model | VUW 246/7-2 (H-GB) |
|---|---|
| Boiler type | Condensing |
| Mounting | Wall-mounted |
| Output Power | 24 kW |
| DHW output | 24 kW |
| Hot Water Output | 24 kW |
| Fuel Type | Gas |
| Gas Type | Natural Gas |
| Dimensions (H x W x D) | 720 x 440 x 338 mm |
| Weight | 36 kg |
| Warranty | 2 years |
| Type | Combi |
Details proper usage, prohibitions, and required qualifications for safe operation.
Covers critical safety warnings for gas, flue gas, electricity, weight, hazards, and water quality.
Emphasizes adherence to national regulations, laws, and specific standards for installation.
Information on warranty registration, contact details for support, and Benchmark Scheme compliance.
Provides detailed technical data including gas category, dimensions, efficiency, and operating ranges.
Details CE marking, energy efficiency endorsements, identification plate, and product design elements.
Explains key safety devices such as electrical supply failure protection and overheating safety.
Lists items included in the delivery and provides product dimensions for installation planning.
Specifies requirements for the installation location, minimum clearances, and compartment ventilation.
Covers regulations, positioning, configuration, protection, and template usage for air/flue pipe systems.
Guides on preparing for installation, gas/water connections, condensate discharge, and system purging.
Details flue installation procedures and critical electrical installation safety requirements.
Explains operating concepts, accessing installer level, using diagnostics codes, and displaying status codes.
Guides on using check programmes and performing initial start-up procedures, including water quality checks.
Covers setting diagnostics codes, burner anti-cycling time, and maximum heating output adjustments.
Details setting pump output, bypass, maintenance intervals, and domestic hot water temperature.
Instructions for final handover, user education on operation, safety, and maintenance.
Outlines completing service records, using original seals, inspection steps, and preparing for maintenance.
Details CO2 checks, setting CO2 content, cleaning heat exchanger, burner, siphon, and strainer.
Covers checking service messages, rectifying faults, calling up fault memory, and deleting fault memory.
Step-by-step guides for replacing components like the burner, fan, PCB, sensors, and vessel.
Instructions for safely and permanently decommissioning the product.
Guidance on correct disposal of packaging materials and the product itself.
A table listing maintenance tasks, intervals, and relevant page references for the service.
Provides overviews of check programmes, diagnostics codes, status codes, fault codes, and wiring diagrams.
Step-by-step chart for verifying flue integrity and performing CO/combustion ratio checks.
To Next Page