Chapter 8: Reports
122
© 2012 Vaisala Canada Inc
Locations. The screen will become greyed out to indicate
that all are included. You can also select specific
locations and zones:
a Select the option Selected Locations and Zones.
b
To select one or more locations in a zone, check the
checkbox next to the zone or expand the zone and
check the checkbox next to the location name.
c To add an index to the graph, select Show Markers.
d To specify a color to highlight a specific location’s da-
ta, select the location, then select an option from the
color dropdown. If you select Auto, viewLinc chooses
a color according to the default color spectrum:
e When the location line colors are set to ‘Auto’ viewLinc
assigns the next free color from a built-in palette of col-
ors (see page 145 for the color spectrum sequence).
Repeat for each location you want to include on the re-
port. All selected locations appear in the Selected re-
gion.
To Next Page
Loading...