Threshold Alarms
viewLinc 4.0 Administrator Guide 89
select the threshold to edit from the Thresholds tab in the
Location Properties panel on the right.
2 Select Options | Edit Threshold. The Edit Threshold
screen displays.
3 Edit threshold settings as desired.
4 Click Save.
Disabling Threshold Alarms
You can temporarily disable alarms without deleting all the
setting information (for example, when you want to move a
device from one location to another).
To temporarily disable a threshold alarm:
1
In Options | System Configuration | Locations Manager,
highlight the row of the location you want to disable
thresholds for.
2 On the Threshold tab of the Location Properties panel,
select
Options | Edit Threshold.
3 In the Edit Threshold screen, deselect Enable Threshold
Alarm.
4
Click Save.
Note: You can also pause alarms - for more informa-
tion, see “Pausing Alarms” on page 97.
Deactivating and Reactivating Threshold Alarms
You may want to deactivate a device’s threshold alarm
because it is no longer required. A deactivated threshold
“disappears”, but can be reactivated.
To Next Page
Loading...