Vaisala Veriteq viewLinc 4.0 - Editing Location Properties

Organizing Locations into Zones
viewLinc 4.0 Administrator Guide 35
zone and can be re-assigned to a different zone from the
device browser. To move channels between zones, see
“Creating Zones” on page 29.
To deactivate child locations:
1
From the Locations tree in Locations Manager, expand
the zone you want to delete.
2 Right click and select Deactivate child locations.
3
A prompt will appear confirming that you want to modify
the location. Click
Yes.
4 The zone will remain in the list until the Locations tree is
saved. Click the left Options dropdown and select
Save.
5 You can now proceed to delete the zone if necessary.
Note: When a location is deactivated, it still remains
part of the zone, but is not active. If you wish to
remove it from the zone entirely, the channel
must be unlinked using the Unlink channel
command. The ‘permanently delete location’
option in the right click menu then becomes
available.
To delete a zone:
1
From the Locations tree in Locations Manager, select the
zone you want to delete.
Note: You cannot delete the System zone.
2
Right click and select Permanently Delete Zone.
3 The zone will remain in the list until the locations tree is
saved. Click the left
Options dropdown and select
Save.
Editing Location Properties
To edit location properties:
1
From the Locations tree in Locations Manager, select the
location you’d like to edit.
2 Right-click and select Edit.