Threshold Alarms
viewLinc 4.0 Administrator Guide 87
To set a threshold alarm:
1
From Options | System Configuration | Locations Manager,
select the location or locations you want to set the
threshold alarm for.
Note: To select multiple locations at one time, hold
down the [Ctrl] key while you select locations. To
select a group of locations in a list, hold down the
[Shift] key and select the first and last locations.
The Locations Properties panel will update auto-
matically.
2
Select the Thresholds Tab, click the Options dropdown
from the Location Properties panel and click
Create X
Threshold
(where X represents the unit reading
measured at this location, such as C or RH or mA).
To Next Page
Loading...