To Next PageTo Next Page
Need help?Do you have a question about the Val Controls IDC24-AF and is the answer not in the manual?
General| Brand | Val Controls |
|---|---|
| Model | IDC24-AF |
| Category | Controller |
| Language | English |
Guidance for safe installation and operation of the IDC module by qualified personnel.
Describes the IDC's use in valve testing and operation with various actuators.
Steps for connecting wires and ensuring correct installation according to manual.
Guide to configuring feedback and auto-calibration via ValConnect software.
Explains the PST process, travel, and overshoot prevention features.
Details parameters for PST errors and warnings, including calculation bases.
Describes the FST process, initiation, and signature analysis.
Details parameters for FST errors and warnings, including calculation bases.
Outlines the sequence of automatic calibration: endpoints, PST, FST, SOT references.
Covers recording reference signatures and setting parameters for PST, FST, and SOT.
Lists and explains PST start condition errors (e.g., Not operational, low/high pressure).
Details PST operational errors like user abort, pressure drop, or no breakaway.
Lists FST start condition errors like not operational or incorrect pressure.
Covers FST errors where breakaway is not detected but pressure is below minimum.
Lists SOT start condition errors like not operational or incorrect pressure.
Details SOT errors related to timeout, breakaway, or pressure drop.
Details software versions and their corresponding new functions and improvements.
