To Next PageTo Next Page
Need help?Do you have a question about the Val Controls IDC24-F and is the answer not in the manual?
General| Brand | Val Controls |
|---|---|
| Model | IDC24-F |
| Category | Controller |
| Language | English |
Module must only be installed by qualified personnel familiar with laws, directives, and standards.
Description of the Partial Stroke Test (PST), its initiation, and operation including overshoot prevention.
Details on PST error and warning parameters, their automatic setting, and manual adjustment.
Description of the Full Stroke Test (FST), its initiation, and typical signatures.
Details on FST error and warning parameters, their automatic setting, and manual adjustment.
Description of the Solenoid test (SOT), its initiation, and operation with/without pressure sensor.
Details on SOT error parameters for tests with and without a pressure sensor.
Overview of the automatic calibration process steps: endpoint, PST, FST, and SOT references.
Detailed list of Partial Stroke Test (PST) errors, their causes, and troubleshooting steps.
Detailed list of Partial Stroke Test (PST) warnings, their causes, and troubleshooting steps.
Detailed list of Full Stroke Test (FST) errors, their causes, and troubleshooting steps.
Detailed list of Full Stroke Test (FST) warnings, their causes, and troubleshooting steps.
Detailed list of Solenoid Valve Test (SOT) errors, their causes, and troubleshooting steps.
