©2015 Toni Clark practical scale GmbH Zeiss-Str.10 D-32312 Lübbecke Tel. 0049 5741/5035 Fax. 05741/40338 www.toni-clark.com
Valach VM 120 B2-4T Instructions
15
Lubrication
It makes sense to lubricate the engine when adjusting the valve gap. Use a O-Road
chain lube with a temperature range of at least 150°C. After many tests, we use the
Würth „HHS 5000“, it contains PTFE and has a temperature range up to 250°C.
The pictures show the lubricating points on the rocker arm bearings and the valve shafts.
Repair
If you have any trouble with your engine, feel free to contact us:
Toni Clark practical scale GmbH
Zeiss-Str. 10
D-32312 Lübbecke
Tel.0049(0) 57415035 Fax.40338 e-mail: reinsch@toni-clark.com
Scope of supply
Engine Feeler gauge 0,1 mm
Instructions Ignition
Prop screws 4 stand os
Prop shaft Spark plug wrench
Prop shaft mounting nuts WS 7 wrench
Prop washer WS 2 Hex key
2 exhaust anges 2 exhaust gaskets
To Next Page
Loading...
General