VALBERG CYCLOMAX - Cleaning the air outlet filter; Disassembling and cleaning the brushes

16
EN
Cleaning and maintenance
C
Cleaning the air outlet filter
Press the air outlet pushbutton to open it.
Press the pushbutton to remove the HEPA filter.
• The HEPA filter can be cleaned under running water.
• Let all the parts dry.
WARNING!
• To avoid damaging the unit, only use and insert dry
filters!
• Reassemble all the parts in reverse order.
Disassembling and cleaning the brushes
Floor brush:
Detach the brush from the tube.
Mini turbo brush:
Detach the brush from the tube and remove the locking
system.
Lift up the transparent cover.
Remove the roller and gently pull the brush out.
• Clean the brush bristles. Let them dry completely.
• Reposition the brush and re-attach the locking system.