15
Cleaning and maintenance
C
Cleaning and maintenance
WARNING!
•
Always unplug the USB connector from the power
supply before cleaning.
• Never immerse the unit in water or any other liquid.
• Detach all accessories from the main unit.
• Remove any blockages from the accessories.
• Clean the unit with a soft, slightly damp cloth. Make sure that
no liquid enters the unit.
•
When cleaning the unit, never use abrasive products, metal
brushes, scourers, wire sponges or sharp utensils.
• After cleaning, dry the unit thoroughly.
Cleaning the dust cup and filters
•
Empty the dust cup whenever it is full or there is a loss of
suction.
Press the two dust cup release buttons to attach or detach
the cup.
Detach the dust cup lid.
Remove the filter.
Remove the central part of the filter over a bin.
Detach the base of the dust cup to empty the contents.
• Wipe the dust cup and the central part of the filter with a dry
cloth.
• The filter can be cleaned under running water.
To Next Page
Loading...
