EasyManuals Logo

VALBERG FBI 16S43 A XAD929C User Manual

VALBERG FBI 16S43 A XAD929C
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
42 43EN EN
Useful information Useful information
C C
4. Reassemble the filters in the reverse order of the
disassembly, replace the filter insert, and rotate clockwise
to the close arrow.
WARNING
• Do not over tighten the filters. Put the filters back in
sequence securely, otherwise coarse debris could get into
the system and cause a blockage.
• Never use the dishwasher without filters in place. Improper
replacement of the filter may reduce the performance level
of the appliance and damage dishes and utensils.
Spray arms
• It is necessary to clean the spray arm regularly for hard
water chemicals will clog the spray arm jets and bearings.
• To clean the spray arms, follow the instructions below:
1. To remove the upper spray arm, hold the nut in the center
still and rotate the spray arm counterclockwise to remove it.
2. To remove the lower spray arm, pull out the spray arm
upward.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VALBERG FBI 16S43 A XAD929C and is the answer not in the manual?

VALBERG FBI 16S43 A XAD929C Specifications

General IconGeneral
BrandVALBERG
ModelFBI 16S43 A XAD929C
CategoryDishwasher
LanguageEnglish

Related product manuals