Valcom VE4022A User Manual

Issue 4
1 947761
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
VE4022A
IP PoE ONE-WAY/TALKBACK LAY-IN
CEILING SPEAKER
INTRODUCTION
The VE4022A Lay-In Talkback IP Ceiling Speaker
provides for handsfree communication anywhere on
an IP-based LAN/WAN. The VE4022A volume
level is electronically adjusted via software. A call
switch input is provided for call in initiation. Power
is provided to the VE4022A via a Power over
Ethernet (PoE) switch meeting the 802.3af
specification.
SPECIFICATIONS
Access Methods
 SIP telephone system
 PBX, FXO Port w/VE801x
 POTS telephone set w/VE801x
 PBX, FXS Port w/VE802x
 Valcom M Cast Page Group
Features
 RJ-45 for network connection
 Network activity LEDs
 Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
23.75” L x 23.75” W x 3.75” D
(60.33cm) x (60.33cm) x(9.53cm)
Weight: 5.8 lbs. (2.63kg)
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch: Class 3
Environment
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
PSE: (Power Sourcing Equipment) to be compliant
IEEE 802.3af
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.

Valcom VE4022A Specifications

General

Brand	Valcom
Model	VE4022A
Category	Speakers
Language	English

Summary

Introduction

Specifications

Access Methods

Lists available connection methods for the speaker.

Features

Highlights key attributes like RJ-45, LEDs, and PoE compatibility.

Dimensions and Weight

Provides physical measurements and weight of the speaker.

Nominal Power Requirements

Specifies power requirements via PoE Ethernet Switch.

Environment

Details operational temperature and humidity requirements.

Important Safety Information

LED and Line Level Connections

LED Connections

Explains the function of LED 1 and LED 2 for call progress indication.

Line Level Out Connection

Describes connecting to Valcom Self Amplified Speakers for sound reinforcement.

Setup and Installation

Setup

Details software programming required for the VE4022A using the IP Solutions Setup Tool.

Mounting

Instructions for mounting the speaker as a direct replacement for a 2' x 2' ceiling tile.

Network Connection

Guidance on connecting the speaker to an Ethernet switch using an RJ-45 patch cable.

Call Switch Connection

Instructions for connecting a momentary contact switch for call initiation.

Mute Out Connection

Describes connecting the Mute Out to classroom audio management systems.

Technical Assistance and Warranty

Technical Assistance

Provides troubleshooting steps and contact information for factory support.

Warranty

Information on where to find warranty details and the repair process.