Need help?Do you have a question about the VALD SmartSpeed Pro and is the answer not in the manual?
Automates SmartSpeed sessions using RFID wrist bands to identify wearers during drills.
Attaches to objects to detect vibration or impact, recording events with millisecond accuracy.
Hand start pads available in two sizes, measuring sprint start accuracy by detecting hand/foot lift.
Enables explosive power measurement and plyometric training integration into SmartSpeed drills.
Connect units and SmartHub to provided chargers. LEDs indicate power and charging status.
Data capture app for iOS/Android. Requires account creation and login. Download from App Store/Google Play.
Cloud application/database with features like team management, custom drills, and results export. Access via web.
Command centre using Zigbee/Bluetooth. Connects to iOS/Android via Bluetooth after powering on and extending antenna.
Assemble tripods, connect timing unit and reflector. Repeat for all gates. Position for drill.
Place unit/reflector in line, turn on unit, align light to reflector until alignment light is on.
Connect accessories (SmartScan, SmartPad, SmartShoxx, Jump Mat) via PS2. Ensure alignment in windy conditions.
Ensure app/hub/units are ready. Select session details, walk through gates, confirm order on screen.
Start, run, and end session. Select options, run protocol, view results. Confirm to end or continue.
Store in hard case, dry components if wet. Turn off units/hub after use. Use provided chargers only; disconnect hub when charged.
Never use damaged items. Use for intended purpose. Charge at room temp. Do not replace batteries.
Maintain 15cm from pacemakers. Consult on interference for hearing aids/other medical devices.
RF signals may affect vehicle electronic systems. Consult vehicle/equipment manufacturer.
General| Category | Sports & Outdoors |
|---|---|
| Wireless Technology | Bluetooth |
| Sampling Rate | 1000 Hz |
| Battery Life | Up to 8 hours |
| Connectivity Version | Bluetooth 4.0 |
To Next Page