4 Appendix - MAC Users
Mac users will need to install USB drivers to connect to the Zeus motor controller.
You can download and install from here:
https://github.com/ledongthuc/example/blob/master/file/CH34x_Install_V1.3.zip
If you do not have a serial monitor program use the one build into the Arduino IDE.
Follow the instructions at this link:
https://www.arduino.cc/en/Guide/MacOSX#toc1
Once the program is installed use connect to the Zeus USB port and use the
Tool>serial port menu to select the serial port.
The use the Tools>Serial Monitor to access the Terminal utility.
To Next Page
Loading...
General