SETUP WIZARD
BASIC SETTINGS
SETUP WIZARD
1. Start the Vallox ventilation unit by plugging in the power cord
to the power outlet.
2. When you start the Vallox ventilation unit for the first time, the
Vallox logo is shown on the MyVallox Control control panel.
3. Press the OK button.
4. The setup wizard is launched.
SELECTING THE LANGUAGE
Select the user interface language as follows:
1. Use the arrow buttons to select the language you want, for
example, English:
2. Press the OK button.
3. The selected language is now English.
SET THE TIME
When the setup wizard prompts you to set the date and time, the
Time and date display opens first:
1. Use the Plus and Minus buttons to set the hours.
2. Press the Right arrow button.
3. Use the Plus and Minus buttons to set the minutes.
4. The time is now set.
5. Proceed to the next phase by pressing the Right arrow
button.
SET THE 24- OR 12-HOUR CLOCK
By default, the system uses the 24-hour clock.
To use the 24 hour clock, proceed to the next step by pressing the
Arrow right button.
To use the 12-hour clock:
1. Press the Minus button. The 24-Hour Time setting value is
changed to Off.
2. Proceed to the next phase by pressing the Right arrow
button.
To Next Page
Loading...
Need help?
General
