What to do if compressor starts, but stops immediately and display shows “- P -“ in Valmar Sweety Quick 130-i?
If the compressor of your Valmar Ice Cream Maker starts but stops immediately, and the display shows “- P -“, it could be due to a closed water supply. Ensure that the water outlet is open. Another possible cause is a disconnected water inlet; make sure to connect the water inlet.
How to fix Valmar Ice Cream Maker that will not start up when switched on?
If your Valmar Ice Cream Maker appliance will not start up when switched on, it might be because the automatic fuses are disconnected. Check the power circuit, turn on the safety switch, and switch on the power fuses again.
Why is the cooling cycle taking too long in my Valmar Sweety Quick 130-i?
If the cooling cycle of your Valmar Ice Cream Maker takes too long, it could be due to a weak water supply flow. Make sure that the valve is open and the pipes are not jammed. Another possible cause is insufficient glycol in the system; check the quantity of the glycol.
Why is the heating cycle taking too long in my Valmar Sweety Quick 130-i?
If the heating cycle of your Valmar Ice Cream Maker is taking too long, it could be because the heater has burnt out or there is not enough glycol in the system. In both cases, it is advised to call VALMAR service technicians.
What to do if cooling is inadequate in Valmar Sweety Quick 130-i?
If the cooling is inadequate in your Valmar Ice Cream Maker, it could be due to a faulty expansion valve, inadequate condensation, a blocked cooling filter, or a gas leakage in the system. In all of these cases, it is advised to call VALMAR service technicians.
General| Category | Ice Cream Maker |
|---|---|
| Model | Sweety Quick 130-i |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Stainless Steel |
| Capacity | 1.5 liters |
Lists essential technical specifications like power, dimensions, capacity, and water flow.
Provides safety guidelines to prevent injuries during transportation and handling of the appliance.
Specifies required air conditions and water supply parameters for optimal appliance operation.
Outlines the voltage, current, and fuse requirements for connecting the appliance to the power supply.
Emphasizes safety precautions before connecting the appliance to power or water supplies.
Explains how to connect the appliance to water and electrical power sources.
Lists and explains various messages and error codes displayed by the appliance for troubleshooting.
Provides essential safety rules and precautions for operating the appliance.
Details cleaning using water pipes, parts in contact with ice cream, and basin disinfection.
To Next Page
