Valore VS2001 - Operating All Shower Jets; Jet Selection and Positioning

English
How to use all jets
When the position knob is placed in between each setting mark, this will result in a sharing of water
output between 2 operating modes .This can be used if combination of 2 modes is desired however
the water output will be reduced due to sharing of water flowing through the system between those
2 operating modes.
Note: How to use two modes simultaneously
When the position knob is placed e, the
handshower and the top hydro jets will work
simultaneously
For example:
8
• Shower Head Position • Hand Shower Position
When the position knob is placed in”a” .
When the position knob is placed in . ”b”
• PositionSpray
When the position knob is placed in . ”c”
• PositionOFF
When the position knob is placed in . ”d”
a
b
c
d
OFF
e