21
Model Code Page
13. Maintenance
130 5
1. 11. 2000
95, 105, 115
X100-X120
Maintenance of optional fixed front
loader
Maintenance weekly (at least every 50
hours)
1. Grease loader bar pivots (24 nipples).
2. Grease nipples of the front axle locking cylinders in the
lower parts of the cylinders (2 nipples).
3. Check hydraulic oil level
Maintenance at every 250 hours
4. Grease the drive shaft of the loader's variable displaceĆ
ment pump (3 nipples)
Maintenance at every 1000 hours (or
yearly)
5. Change hydraulic oil and filter
Note! In service inspection after 100 running hours, the front
loader oil filter must be changed.
Note! Regularly check the tightening of the bolts and nuts for
the front axle locking cylinder attachments. Check now and
then that the breathers are open. They can be loosen by unsĆ
rewing.
To Next Page
Loading...
