Need help?Do you have a question about the Valtra T Series and is the answer not in the manual?
Details the Valtra smart A-pillar display, its screen technologies and configuration options.
Explains the various controls and functions available on the SmartTouch armrest.
Guide to operating the drive lever and other external controls.
Overview of the SmartTouch terminal's user interface and display functions.
Details the EcoPower mode on N155Eco and T175Eco models for high torque work.
Instructions on how to engage, adjust, and use the speed cruise control feature.
Explains how to set and use the engine speed memory function for constant RPM.
Guide on activating hydraulics, steering, and memory buttons via the master button.
How to program one-action or sequence programs onto memory buttons.
Guide to recording and programming U-Pilot sequences for headland operations.
Overview of programmable hydraulic controls on the SmartTouch armrest.
How to configure front/rear hydraulics, valve control, and flow settings.
How to use the power take-off (PTO) to transmit power from the tractor to an implement.
Setting limits for automatic PTO start and stop based on linkage position.
How to create, manage, and activate user profiles for tractor settings.
Guide to engaging, adjusting, and disengaging the optional QuickSteer steering system.
To Next Page
General
