Valtra T Series - Transmission Settings

TRANSMISSION
SETTINGS
1
4 5 6
3
7
2
1.
Pre-programmed forward speed
for drive lever mode.
Set value 0-max speed.
2.
Maximum speed.
Set value 0-set speed. Tractor will not go faster.
3.
Pre-programmed reverse speed
for drive lever mode.
Set value 0-max speed.
4.
Automatic shifting between
speed ranges C and D.
5.
Transmission droop adjustment.
Priority for engine or transmission.
6.
Addtional transmission settings, like turbine clutch simulation
(needed for extra smooth starts or front loader use)
7.
Automatic slip regulation.
• OFF
• 1 = small inuence
• 5 = large inuence
T/N Series Quick Guide / Direct
12